Glad to see Mark Arcenal back on the skid-pad at the inaugural Word Up! Drift Gymkhana event in NorCal! And thanks for the shoutout, we’re glad we could be of assistance.

Check out the current state of his S14 in action:

In car manji footage from the event:

Thanks again Mark and WFC for the video!

Pick up the December issue of DSport on stands this month and check out Mike’s S14 feature!

Just look for either of the two covers:

Here are a couple shots from behind the scenes on the day of the shoot:

Congrats Mike, and thanks to everyone over at DSport!

While it’s still a fairly new chassis, as far as EVO Xs in the US go, this one most definitely stands out from the crowd.  Ray, aka “Raytrix” on EvoM, spent a lot of time waiting for some ‘first-off’ parts for his EVO X to hit the shores and it paid off.  Way to properly represent the Midwest!

Check:

Here are just a few of the mods that currently comprise this build:
-WEDS Sports SA-55M 18×10 +18 Matte Gray Machined
-Stance LX+ Coilovers
-Varis Euro Spec GT wing 1430mm with 290mm stands
-Craft Square Side Mirrors
-Touge Factory prototype titanium UICP
-Greddy SE exhaust
-Ichiba Test Pipe
-Cusco front and rear strut bars
-APR Vortex Generator Version 1

Thanks for the photos Ray! We’re glad we’ve been able to help piece together this project so far and can’t wait to see where it goes from here!

Hey guys, check out this latest clip of the STANCE/TF Time Attack EVO during a recent testing session at Autobahn.  Enjoy quality visuals from T2Films featuring music from local beatsmith 3LLL:

As always, thanks for the great work T2 and 3LLL!

Hey guys, check out this latest clip of the STANCE/TF Time Attack EVO during a recent testing session at Autobahn.  Enjoy quality visuals from T2Films featuring music from local beatsmith 3LLL: Read more »

Tired of the vibration from your aftermarket wheels?   Well check out the newly instock hubcentric rings.  With applications ranging from Scion to Nissan we have you covered.

TITEK S-Chassis SR20DET Carbon Fiber Spark Plug covers.
Made with high quality carbon fiber material, lightweight
construction. Which means, that its clean and doesn’t have
excess resin to weigh it down.

Read more »

Touge Factory has made its mark in the drifting community and now we are expanding to cater to the grip community as well!

The new TF project car:

Read more »

In the latest issue of Drift tengoku magazine, they took the top 5 D1 driver’s coilovers and put them on the dyno.
We have the top 4 coilovers in the order they were listed, 1st place being DG-5 and 5th being D-max, all the cars were S13. 4th place was taken out as it was for a WRX. We plotted Stance Gr+ to see how it compares.
Check out the similar plot of 2 champion creating systems, Stance and DG-5.

If you’re in IL area and need powder coating service, look no further. CM Werks can powder coat your valve cover, wheels, manifolds, suspension arms, subframes….you name it. Powder coating has many advantages over paint. It is much more durable than paint and is scratch resistant. In some cases it is also more affordable. Because the powder adheres to the surface before it is cured, every hole and crevices get protected. You can even get Candy colors, textures just like paint. Call CM werks to get a quote, Please tell them Touge Factory sent you to get a great price!

CM Werks 1-630-455-5589 www.cmwerks.com

Check out these Kandy red and blue they just did!